NTN 4T-32208 Tapered Roller Bearing | 40 x 80 x 24.75 mm

NTN 4T-32208 Tapered Roller Bearing

Same story as its 32209 shelf mate, one size smaller. The bearing is in unopened factory heat shrink wrap and the cone is stamped 4T 32208, NTN and JAPAN CL. The wrap also carries 805-32208 hand written in marker, which we keep as a cross reference tag and nothing more.

The 32208 is a single row metric tapered roller bearing with a 40 mm bore, an 80 mm outside diameter and a 24.75 mm assembled width, supplied as a matched cone and cup. NTN's 4T prefix marks its case hardened four top bearing steel. It is one of the most common shaft sizes in gearboxes, pump drives, pinion carriers and hubs, which is why it is worth keeping one on the shelf.

Fitting notes that save a callback. Tapered rollers go in opposed pairs and the pair sets the preload, so do the job properly and replace both sides. Never mix a new cone into an old cup, because the two are lapped together at the factory. Drive on the correct race, keep the grease clean, and check the shaft and housing for the wear that killed the last bearing before you press this one in.

Genuine NTN, made in Japan, still sealed.

What is on the part

• Stamped 4T 32208
• Stamped NTN
• Stamped JAPAN CL, made in Japan
• Hand written on the factory wrap: 805-32208, carried as a cross reference only

Specification

• Bore 40 mm
• Outside diameter 80 mm
• Assembled width 24.75 mm
• Type: single row tapered roller bearing, cone and cup

Fitment

• Make: NTN
• Application: any 40 x 80 x 24.75 mm tapered roller bearing position. No machine model is marked on the part, so match by size or by the number on the bearing you are replacing
• Interchange: 32208 in the standard metric tapered series

Stocked one unit in Prince George, BC. Ships free Canada wide, no brokerage surprise. Price is all in.